Ajax MotionCam Outdoor (White) Wireless Alarm System Motion Detector Sensor with a photo camera to verify alarms
The Ajax MotionCam Outdoor is a cutting-edge security solution for the outdoors. It features wireless connectivity and a photo camera that verifies any detected motion. The device detects intrusions from the moment someone steps onto the property and confirms the presence of an intruder through a series of animated photos. This visual verification provides instant confirmation of the situation, eliminating worries for the user and preventing unnecessary dispatches for security companies.
- HDR Camera
- IR Backlight
- Series of 2-5 photos
- Uncompromising communication reliability
- Intelligent false alarm filter
- Multilevel anti-sabotage protection
- Effective security in any weather
- Hood for protecting camera and anti-masking sensors from rain and snow.
- LED indicator.
- Motion detector lens.
- IR backlight for night photos and low light conditions.
- SmartBracket mounting panel. To remove the panel, slide it down.
- Perforated part of the mounting panel. Necessary for tamper triggering in case of any attempt to detach the detectors from the surface. Do not break it off.
- The hole for attaching the SmartBracket mounting panel with a screw.
- Power button.
- Tamper button. Triggers when an attempt is made to detach the detector from the surface or remove the mounting panel.
- Detector’s QR code / identifier. Used to connect MotionCam Outdoor to the Ajax security system.
- Scrollbar for adjusting the detection range.
|Classification || |
Electro-optical radio channel security detector
|Type of detector|| |
|Installation method|| |
Outdoors / indoors
|Recommended installation height|| |
0.8 – 1.3 m
|Compatibility||Only with Hub 2 or Hub 2 Plus|
|Sensing element|| |
2 × PIR sensor
|Motion detection distance || |
Adjustable, from 3 to 15 m
|Pet immunity|| |
Animals up to 80 cm tall
Adjustable, 3 levels
|Motion detector’s viewing angle|| |
Horizontal — 90°
Vertical — 80°
|Camera’s angle|| |
Horizontal — 105°
Vertical — 50°
|TV distortion (EBU standard)|| |
|Photo in case of alarm|| |
Shooting series up to 5 photos
|Infrared light for shooting in the dark|| |
|Power supply|| |
4 × CR123A batteries
|Supply voltage || |
|Battery life || |
Up to 3 years (up to 2.5 years if “Delay when entering” setting is activated)
|Jeweller radio technology|| |
Communication range with a hub – up to 1,700 m in an open space
Two-way communication between hub and device
Operating frequencies — 868.0–868.6 MHz3
Self-adjusting RF output power — up to 20 mW
Block encryption with a dynamic key
Detector polling period — 12–300 s
|Alarm delivery time|| |
|Wings radio technology |
Transmission of a series of photos
Photo delivery time with a default settings: up to 9 seconds
|Temperature sensor || |
|Operating temperature range|| |
From –25°С to +60°С
|Operating humidity|| |
Up to 95%
|Protection class || |
|Anti-sabotage || |
Protection against forgery
|Remote configuration and testing || |
|CMS compatibility ||CMS connectivity: Contact ID, SIA (DC-09)|
|Dimensions || |
206 × 108 × 93 mm
|Weight || |
Lightning-fast alarms. Verified.
MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary dispatches.
Don’t miss a thing
Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.
CMS software supporting visual alarms verification
Intelligent false alarm filter
MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. As soon as both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interference.
Whenever MotionСamOutdoor detects motion, LISA analyses and compares signal forms from two sensors in real-time. If forms are similar, the alarm is activated.
When both sensors detect motion, but the correlational analysis doesn’t identify enough similarities, LISA compares frequency components in the signals of both sensors.
Multilevel sabotage protection
MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors that react to hindering, covering and painting the lens.
- Anti-masking system
- Notifications about detachment
- Configurable Hub — Detector polling periods
Effective security in any weather
MotionCam Outdoor resists the heat up to +60°С and withstand the cold up to –25°С. And to protect the sensors of the anti-masking system from rain and snow, we have provided a special Hood.
- Efficiency in heat and cold
- IP55 body protection
- Hood to protect from rain and snow in the kit
Less manual labor. More settings in the app.
The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time, test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.